|
|
|
Publications in Math-Net.Ru |
Citations |
|
2017 |
| 1. |
S. E. Aleksandrov, E. A. Lyamina, K. Manabe, “Roughness of the free surface of thin-walled tubes under compression”, Prikl. Mekh. Tekh. Fiz., 58:2 (2017), 180–187   ; J. Appl. Mech. Tech. Phys., 58:2 (2017), 342–348 |
|
2014 |
| 2. |
S. E. Aleksandrov, E. A. Lyamina, N. M. Tuan, “Generalization of the Prandtl problem for a creep model”, Prikl. Mekh. Tekh. Fiz., 55:4 (2014), 152–159 ; J. Appl. Mech. Tech. Phys., 55:4 (2014), 682–688 |
| 3. |
R. V. Goldshtejn, S. E. Aleksandrov, “Effect of the relationship between the elastic modulus and plastic strain on residual stresses and strains in a tube”, Prikl. Mekh. Tekh. Fiz., 55:1 (2014), 91–98 ; J. Appl. Mech. Tech. Phys., 55:1 (2014), 74–80 |
|
2012 |
| 4. |
S. E. Aleksandrov, E. A. Lyamina, “Plastic limit state of a thin hollow disk under thermomechanical loading”, Prikl. Mekh. Tekh. Fiz., 53:6 (2012), 102–111 ; J. Appl. Mech. Tech. Phys., 53:6 (2012), 891–898 |
3
|
| 5. |
S. E. Aleksandrov, “Upper bound of the limit load for a tensile cylinder with a soft welded (soldered) joint containing a crack”, Prikl. Mekh. Tekh. Fiz., 53:5 (2012), 184–191 ; J. Appl. Mech. Tech. Phys., 53:5 (2012), 793–799 |
1
|
|
2011 |
| 6. |
S. E. Aleksandrov, E. A. Lyamina, “On constructing the theory of ductile fracture near friction surfaces”, Prikl. Mekh. Tekh. Fiz., 52:4 (2011), 183–190 ; J. Appl. Mech. Tech. Phys., 52:4 (2011), 657–663 |
5
|
| 7. |
S. E. Aleksandrov, D. Vilotich, E. A. Lyamina, L. Shidzhanin, “Thickness of the layer of intense plastic deformation in the vicinity of the friction surface during upsetting of a cylinder with flat dies”, Prikl. Mekh. Tekh. Fiz., 52:3 (2011), 190–195 ; J. Appl. Mech. Tech. Phys., 52:3 (2011), 491–495 |
9
|
| 8. |
S. E. Aleksandrov, “Behavior of anisotropic plastic solutions in the vicinity of maximum-friction surfaces”, Prikl. Mekh. Tekh. Fiz., 52:3 (2011), 181–189 ; J. Appl. Mech. Tech. Phys., 52:3 (2011), 483–490 |
6
|
|
2009 |
| 9. |
S. E. Aleksandrov, E. A. Lyamina, “Solving the problem of expansion and extension of a hollow cylinder with the use of the gradient plasticity theory”, Prikl. Mekh. Tekh. Fiz., 50:6 (2009), 186–192 ; J. Appl. Mech. Tech. Phys., 50:6 (2009), 1071–1076 |
| 10. |
S. E. Aleksandrov, “Specific features of solving the problem of compression of an orthotropic plastic material between rotating plates”, Prikl. Mekh. Tekh. Fiz., 50:5 (2009), 186–192 ; J. Appl. Mech. Tech. Phys., 50:5 (2009), 886–890 |
8
|
| 11. |
S. E. Aleksandrov, A. R. Pirumov, O. V. Chesnikova, “Compression of a plastic porous material between rotating plates”, Prikl. Mekh. Tekh. Fiz., 50:4 (2009), 128–135 ; J. Appl. Mech. Tech. Phys., 50:4 (2009), 651–657 |
3
|
| 12. |
S. E. Aleksandrov, E. A. Lyamina, “Strain-rate intensity factor in compression of a layer of a plastic material between cylindrical surfaces”, Prikl. Mekh. Tekh. Fiz., 50:3 (2009), 171–180 ; J. Appl. Mech. Tech. Phys., 50:3 (2009), 504–511 |
2
|
|
2008 |
| 13. |
S. E. Aleksandrov, “Limit load in bending of welded samples with a soft welded joint”, Prikl. Mekh. Tekh. Fiz., 49:2 (2008), 216–222 ; J. Appl. Mech. Tech. Phys., 49:2 (2008), 340–345 |
4
|
|
2006 |
| 14. |
S. E. Aleksandrov, E. A. Lyamina, “Prediction of fracture in the vicinity of friction surfaces in metal forming processes”, Prikl. Mekh. Tekh. Fiz., 47:5 (2006), 169–174 ; J. Appl. Mech. Tech. Phys., 47:5 (2006), 757–761 |
12
|
|
2005 |
| 15. |
S. E. Aleksandrov, E. A. Lyamina, “Qualitative distinctions in the solutions based on the plasticity theories with the Mohr–Coulomb yield criterion”, Prikl. Mekh. Tekh. Fiz., 46:6 (2005), 136–145 ; J. Appl. Mech. Tech. Phys., 46:6 (2005), 883–890 |
10
|
| 16. |
S. E. Aleksandrov, “Singular solutions in an axisymmetric flow of a medium obeying the double shear model”, Prikl. Mekh. Tekh. Fiz., 46:5 (2005), 180–186 ; J. Appl. Mech. Tech. Phys., 46:5 (2005), 766–771 |
15
|
|
2000 |
| 17. |
S. E. Aleksandrov, N. N. Aleksandrova, “Discontinuous velocity fields in a hardening rigid-plastic material”, Prikl. Mekh. Tekh. Fiz., 41:1 (2000), 198–203 ; J. Appl. Mech. Tech. Phys., 41:1 (2000), 182–187 |
1
|
|
1995 |
| 18. |
S. E. Aleksandrov, R. V. Goldshtejn, “A variational principle in the theory of plastic flow taking into
account the formation of separation cracks”, Dokl. Akad. Nauk, 342:4 (1995), 484–486   ; Dokl. Math., 40:6 (1995), 297–299 |
|
1993 |
| 19. |
S. E. Aleksandrov, R. V. Goldshtejn, “Flow of a plastic substance through a convergent channel: Characteristics of the solution”, Dokl. Akad. Nauk, 332:3 (1993), 314–316 |
| 20. |
S. E. Aleksandrov, L. R. Vishnyakov, “Pressing thin-walled tubing from powdered material”, Prikl. Mekh. Tekh. Fiz., 34:2 (1993), 12–19 ; J. Appl. Mech. Tech. Phys., 34:2 (1993), 162–168 |
1
|
| 21. |
L. R. Vishnyakov, S. E. Aleksandrov, L. I. Feodos'eva, “Joint flow of a powder matrix and reinforcing mesh under plane deformation”, Prikl. Mekh. Tekh. Fiz., 34:1 (1993), 144–150 ; J. Appl. Mech. Tech. Phys., 34:1 (1993), 138–144 |
|
1992 |
| 22. |
S. E. Aleksandrov, “Discontinuous velocity fields under arbitrary deformation of an
ideal rigid-plastic body”, Dokl. Akad. Nauk, 324:4 (1992), 769–772 ; Dokl. Math., 37:6 (1992), 283–284 |
|
1990 |
| 23. |
S. E. Aleksandrov, B. A. Druyanov, “Investigating the process of the steady extrusion of a compacted material”, Prikl. Mekh. Tekh. Fiz., 31:4 (1990), 141–145 ; J. Appl. Mech. Tech. Phys., 31:4 (1990), 645–649 |
2
|
| 24. |
S. E. Aleksandrov, B. A. Druyanov, “Pressing of a compact plastic material”, Prikl. Mekh. Tekh. Fiz., 31:1 (1990), 117–123 ; J. Appl. Mech. Tech. Phys., 31:1 (1990), 108–113 |
4
|
|
| Organisations |
|
| |
|
|
Contact us: