|
|
Publications in Math-Net.Ru |
Citations |
|
2018 |
1. |
E. V. Karpov, A. G. Demeshkin, “Strain and fracture of glass textolite containing metal layers”, Prikl. Mekh. Tekh. Fiz., 59:4 (2018), 141–148 ; J. Appl. Mech. Tech. Phys., 59:4 (2018), 699–705 |
4
|
2. |
V. M. Kornev, A. G. Demeshkin, “Quasi-brittle fracture of compact specimens with sharp notches and U-shaped cuts”, Prikl. Mekh. Tekh. Fiz., 59:1 (2018), 138–152 ; J. Appl. Mech. Tech. Phys., 59:1 (2018), 120–131 |
3
|
|
2016 |
3. |
V. D. Kurguzov, A. G. Demeshkin, “Experimental and theoretic study of the buckling of narrow thin plates on an elastic foundation under compression”, Prikl. Mekh. Tekh. Fiz., 57:3 (2016), 121–128 ; J. Appl. Mech. Tech. Phys., 57:3 (2016), 494–500 |
3
|
|
2014 |
4. |
V. M. Kornev, A. G. Demeshkin, “Model of stepwise propagation of the tip of a hydraulic fracture in the absence of filtration”, Prikl. Mekh. Tekh. Fiz., 55:3 (2014), 164–173 ; J. Appl. Mech. Tech. Phys., 55:3 (2014), 515–523 |
|
2013 |
5. |
A. G. Demeshkin, A. A. Schwab, “Influence of hostile alkaline environment on strength properties of technical fibers”, Vestn. Samar. Gos. Tekhn. Univ., Ser. Fiz.-Mat. Nauki [J. Samara State Tech. Univ., Ser. Phys. Math. Sci.], 2(31) (2013), 36–41 |
|
2011 |
6. |
V. M. Kornev, A. G. Demeshkin, “Quasi-brittle fracture diagram of structured bodies in the presence of edge cracks”, Prikl. Mekh. Tekh. Fiz., 52:6 (2011), 152–164 ; J. Appl. Mech. Tech. Phys., 52:6 (2011), 975–985 |
13
|
7. |
A. G. Demeshkin, A. A. Schwab, “Research into the mechanical properties of continuous basalt fibre relating to composit materials manufacture”, Vestn. Samar. Gos. Tekhn. Univ., Ser. Fiz.-Mat. Nauki [J. Samara State Tech. Univ., Ser. Phys. Math. Sci.], 3(24) (2011), 185–188 |
4
|
|
2009 |
8. |
A. G. Demeshkin, V. M. Kornev, “Crack path kinking under generalized stress state”, Prikl. Mekh. Tekh. Fiz., 50:3 (2009), 205–213 ; J. Appl. Mech. Tech. Phys., 50:3 (2009), 532–539 |
1
|
|
2003 |
9. |
A. E. Alekseev, A. G. Demeshkin, “Detachment of a beam glued to a rigid plate”, Prikl. Mekh. Tekh. Fiz., 44:4 (2003), 151–158 ; J. Appl. Mech. Tech. Phys., 44:4 (2003), 577–583 |
4
|
10. |
V. M. Kornev, A. G. Demeshkin, “Necessary and sufficient fracture criteria for a composite with a brittle matrix. Part 2. High-strength reinforcement”, Prikl. Mekh. Tekh. Fiz., 44:3 (2003), 148–156 ; J. Appl. Mech. Tech. Phys., 44:3 (2003), 425–431 |
2
|
|
2001 |
11. |
A. G. Demeshkin, M. E. Kozeko, V. M. Kornev, V. D. Kurguzov, “Damping characteristics of composite structural materials fabricated by winding”, Prikl. Mekh. Tekh. Fiz., 42:1 (2001), 190–195 ; J. Appl. Mech. Tech. Phys., 42:1 (2001), 169–173 |
6
|
|
1999 |
12. |
V. M. Kornev, A. G. Demeshkin, T. A. Korneva, “Theoretical and experimental estimates of the brittle strength of solids produced by compaction of powders”, Prikl. Mekh. Tekh. Fiz., 40:5 (1999), 208–215 ; J. Appl. Mech. Tech. Phys., 40:5 (1999), 962–968 |
|
1994 |
13. |
V. V. Adishchev, A. G. Demeshkin, “An experimental study of the dynamic deformation of model pile specimens”, Fizika Goreniya i Vzryva, 30:4 (1994), 136–138 ; Combustion, Explosion and Shock Waves, 30:4 (1994), 534–536 |
14. |
N. S. Astapov, A. G. Demeshkin, V. M. Kornev, “Buckling of a bar on an elastic base”, Prikl. Mekh. Tekh. Fiz., 35:5 (1994), 106–112 ; J. Appl. Mech. Tech. Phys., 35:5 (1994), 739–744 |
6
|
|
1991 |
15. |
A. G. Demeshkin, V. M. Kornev, “Transmitted waves and the dynamic edge effect in an anisotropic strip. (Comparison with experimental data)”, Prikl. Mekh. Tekh. Fiz., 32:2 (1991), 144–149 ; J. Appl. Mech. Tech. Phys., 32:2 (1991), 274–280 |
|
Organisations |
|
|
|
|