plasticity; dynamics of thin-walled elements of structures; mechanics of composite materials and structures
Biography
ACADEMIC DEGREES: Ph. D. in 1996, Lavrentiev Institute of Hydrodynamics, Siberian Branch of the Russian Academy of Science, for the thesis “Plastic deformation of intricate plates under dynamic loading”; M. S. in 1981, Novosibirsk State University.
EMPLOYMENT 2008 – present Senior staff scientist; Institute of Theoretical and Applied Mechanics of the Siberian Branch of the Russian Academy of Science; 1997 – 2008 Senior Researcher; Institute of Theoretical and Applied Mechanics of the Siberian Branch of the Russian Academy of Science; 1986 – 1997 Researcher; Institute of Theoretical and Applied Mechanics of the Siberian Branch of the Russian Academy of Science; 1985 – 1986 Researcher; Novosibirsk State University.
GRANTS 2014-2016 Grant of the Russian Foundation of Basic Research “Hybrid and optimal design of composite structures”; 2014-2015 Grant of the Russian Foundation of Basic Research “Research of problems of the control of thermal and thermo-strained fields in composite structures”; 2012-2013 Grant of the Russian Foundation of Basic Research “Mathematical modeling and optimization of thermoviscoelastic and thermoviscoplastic behaviour of the layered and composite solids under complex loads”; 2011-2013 Grant of the Russian Foundation of Basic Research “Dynamics of plastic thin-walled composite barriers”; 2010-2011 Grant of the Russian Foundation of Basic Research “Rational and optimum structural design at intensive thermo-force loadings”; 2008-2010 Grant of the Russian Foundation of Basic Research “Creep and time strength of composite structures”; 2008-2009 Grant of the Russian Foundation of Basic Research “Direct and inverse problems of thermal conduction and deformation of the thermo-elastic stratified mediums and composite structures”; 2006-2007 Grant of the Russian Foundation of Basic Research “The theory and practice of calculation and rational designing of homogeneous and composite designs at dynamic loadings”; 2005-2007 Grant of the Russian Foundation of Basic Research “The theory of deformation and damageability of plane homogeneous and composite barriers”; 2002-2004 Grant of the Russian Foundation of Basic Research “The theory of elasticity and plasticity of structures with non-homogeneous reinforcement structures”; 1999-2001 Grant of the Russian Foundation of Basic Research “Short-term and long-term durability of thermal and radiation-sensitive composite materials and structures”; 1995-1996 Grant of the Russian Foundation of Basic Research “The development of the theory and methods of solutions of plane and spatial problems for fibrous media with equally-stress reinforcement”.
T. P. Romanova, “Limit analysis and optimal support of reinforced three-layer
circular plates of different resistant materials under non-uniform loading”, Vestn. Samar. Gos. Tekhn. Univ., Ser. Fiz.-Mat. Nauki [J. Samara State Tech. Univ., Ser. Phys. Math. Sci.], 20:3 (2016), 508–523
2014
2.
T. P. Romanova, “The Optimal Location of the Polygonal Internal Supports to the Circular Rigid-Plastic Plates”, Vestn. Samar. Gos. Tekhn. Univ., Ser. Fiz.-Mat. Nauki [J. Samara State Tech. Univ., Ser. Phys. Math. Sci.], 3(36) (2014), 94–105
Yu. V. Nemirovskii, T. P. Romanova, “Load-bearing capacity of curvilinear ice plates reinforced by a rigid insert”, Prikl. Mekh. Tekh. Fiz., 54:4 (2013), 141–149; J. Appl. Mech. Tech. Phys., 54:4 (2013), 636–643
2011
4.
Yu. V. Nemirovskii, T. P. Romanova, “Modeling of dynamic deformation of rigid-plastic doubly connected plates with arbitrary fixed curvilinear contours on a viscoelastic foundation”, Prikl. Mekh. Tekh. Fiz., 52:2 (2011), 156–172; J. Appl. Mech. Tech. Phys., 52:2 (2011), 288–302
2008
5.
Yu. V. Nemirovskii, T. P. Romanova, “Modeling of dynamic behaviour of doubly connected rigid-plastic curved plates supported on the internal contour”, Matem. Mod. Kraev. Zadachi, 1 (2008), 197–207
Yu. V. Nemirovskii, T. P. Romanova, “Dynamic deformation of rigid-plastic curvilinear plates of variable thickness”, Prikl. Mekh. Tekh. Fiz., 48:5 (2007), 108–120; J. Appl. Mech. Tech. Phys., 48:5 (2007), 712–722
Yu. V. Nemirovskii, T. P. Romanova, “Dynamic deformation of a curved plate with a rigid insert”, Prikl. Mekh. Tekh. Fiz., 47:2 (2006), 126–138; J. Appl. Mech. Tech. Phys., 47:2 (2006), 254–265
Yu. V. Nemirovskii, T. P. Romanova, “Optimization of dynamic plastic deformation of plates with a complex contour”, Prikl. Mekh. Tekh. Fiz., 42:1 (2001), 170–178; J. Appl. Mech. Tech. Phys., 42:1 (2001), 152–159
Yu. V. Nemirovskii, T. P. Romanova, “Effect of pulsed load form on retained deflections of rigidly-plastic plates of a complex shape”, Prikl. Mekh. Tekh. Fiz., 36:6 (1995), 113–121; J. Appl. Mech. Tech. Phys., 36:6 (1995), 894–902
1988
11.
Yu. V. Nemirovskii, T. P. Romanova, “Dynamic bending of polygonal plastic slabs”, Prikl. Mekh. Tekh. Fiz., 29:4 (1988), 149–157; J. Appl. Mech. Tech. Phys., 29:4 (1988), 591–597
Contact us: