Full list of publications: |
|
|
Citations (Crossref Cited-By Service + Math-Net.Ru) |
|
|
2021 |
1. |
O. S. Kuznetsova, M. N. Kirsanov, Matematicheskii analiz. Sbornik zadach i reshenii s primeneniem sistemy Maple : uchebnoe posobie, INFRA-M, Moskva, 2021 , 375 pp. |
2. |
M. Kirsanov, A. Shirokov, “The lower limit of the first frequency of natural vibrations externally statically indeterminate truss: analytical solution”, E3S Web of Conferences. – EDP Sciences, 264 (2021), 0203410 , 10 pp.
|
1
[x]
|
3. |
M. Kirsanov, O. Vorobyev, “Calculating of a spatial cantilever truss natural vibration frequency with an arbitrary number of panels: analytical solution”, Construction of Unique Buildings and Structures, 94 (2021), 9402 , 10 pp. |
4. |
M. Kirsanov, E. Petrichenko, O. Vorobev, “The formula for the lower estimate of the fundamental frequency of natural vibrations of a truss with an arbitrary number of panels”, Construction of Unique Buildings and Structures, 94 (2021), 9403 , 10 pp. |
5. |
M. N. Kirsanov, “Deformations of the Rod Pyramid: An Analytical Solution”, Construction of Unique Buildings and Structures, 95 (2021), 9501 , 10 pp. |
6. |
M. Kirsanov, V. Khromatov, “Deformation of the transmission towers: analytical solution”, Construction of Unique Buildings and Structures, 96 (2021), 9602 , 9 pp. |
7. |
M. N. Kirsanov, “Dependence of the two-span truss bridge vibration frequency on the number of panels”, Construction of Unique Buildings and Structures, 2021, 9703 , 8 pp. |
8. |
M. N. Kirsanov, “Analytical calculation of deflection of a planar truss with a triple lattice”, Magazine of Civil Engineering, 2021, no. 2, 10211 , 6 pp. |
9. |
M. N. Kirsanov, “Model and Analytical Calculation of a Spatial Truss”, Lecture Notes in Civil Engineering, 150 (2021), 496–503 |
10. |
M. N. Kirsanov, “Spectrum of own frequencies of a spatial surfacing girder”, Russian Journal of Building Construction and Architecture, 51:3 (2021), 104–113 |
|
2020 |
11. |
M. N. Kirsanov, Trussed Frames and Arches: Schemes and Formulas, Cambridge Scholars Publishing, Newcastle upon Tyne, UK, 2020 , 178 pp. |
12. |
M. Kirsanov, D. Serdjuks, K. Buka-Vaivade, “Analytical Dependence of Deflection of the Lattice Truss on the Number of Panels”, Springer Nature Switzerland AG 2020 B. Anatolijs et al. (eds.), Proceedings of EECE 2019, Lecture Notes in Civil Engineering, 70 (2020), 25-35 |
13. |
A. Podkoritovs, D. Serdjuks, V. Goremikins, K. Buka-Vaivade, M.N. Kirsanov, “Behaviour of a space inverted triangular steel truss”, Baltic Journal of Road and Bridge Engineering, 15:4 (2020), 54–70
|
1
[x]
|
|
2019 |
14. |
M. N. Kirsanov, Planar Trusses: Schemes and Formulas., Cambridge Scholars Publishing, Newcastle upon Tyne, UK, 2019 , 198 pp. |
15. |
M. N. Kirsanov, Ploskie fermy. Skhemy i raschetnye formuly: spravochnik., INFRA-M, Moskva, 2019 , 238 pp. https://znanium.com/read?id=338723 |
|
2018 |
16. |
M. N. Kirsanov, “Installation diagram of the lattice truss with an arbitrary number of panels”, Magazine of Civil Engineering, 81:5 (2018), 174–182 |
|
2017 |
17. |
M. Kirsanov, “Analysis of deformations of the open hinged-rod ring”, Innovatsionnaya nauka, 2017, no. 2-1, 10–11 |
18. |
M. A. Al-Sharabi Ali, M. N. Kirsanov, “Analysis of natural frequencies for the multi-link lift”, Nauchnyi almanakh, 28:2-3 (2017), 234–237 |
19. |
I. A. Ilin, M. N. Kirsanov, “Analysis of the deflection of externally statically indeterminate truss”, Nauchnyi almanakh, 28:2-3 (2017), 260–263 |
20. |
M. N. Kirsanov, M. G. Lafickova, A. S. Nikitina, “Analysis of the deflection of flat roof trusses”, Science Almanac, 29:3-3 (2017), 262–265 |
21. |
M. N. Kirsanov, S. E. Kollerova, “Elastic characteristics of a stochastically inhomogeneous medium modeled by a rod grid”, Science Almanac, 29:3-3 (2017), 258–261 |
22. |
I. A. Ilin, M. N. Kirsanov, “Inductive derivation of formula for deflection of truss with reinforcing struts”, Akademicheskaya publitsistika, 2017, no. 3, 27–30 |
23. |
N. A. Belyankin, A. Y. Boyko, M. N. Kirsanov, “Inductive derivation of rod cladding structures deflection in the system Maple”, Science Almanac, 30:4-3 (2017), 194–197 |
24. |
M. N. Kirsanov, S. V. Astahov, “Mathematical model of the industrial facility's roof arch”, Architecture and Engineering, 2:2 (2017), 8–14 |
25. |
M. N. Kirsanov, Kaifei Shi, “The calculation of the deflection of the truss with cross bars in the system Maple”, Science Almanac, 29:3-3 (2017), 266–269 |
26. |
M. N. Kirsanov, R. C. Razananairina, “The formula for deflection of truss with cases of kinematic variability”, Postulat, 2017, no. 9 |
27. |
M. N. Kirsanov, Kaifei Shi, “The formulas for calculating girders with asymmetric triangular lattice”, Science Almanac, 29:3-3 (2017), 270–273 |
28. |
M. N. Kirsanov, A. R. Rakhmatulina, A. A. Smirnova, “Analiz progiba vneshne staticheski neopredelimoi balochnoi fermy”, Stroitelnaya mekhanika i konstruktsii, 14:1 (2017), 31–35 |
29. |
M. N. Kirsanov, “Analiz stabilnosti sfericheskogo dvizheniya pri slozhnom reologicheskom soprotivlenii”, Prostranstvo, vremya i fundamentalnye vzaimodeistviya, 2017, no. 2, 53–59 , Moskva, Moskva |
30. |
M. N. Kirsanov, “Analiz usilii i deformatsii v korabelnom shpangoute modeliruemogo fermoi”, Vestnik gosudarstvennogo universiteta morskogo i rechnogo flota im. admirala S.O. Makarova, 9:3 (2017), 560–569
|
1
[x]
|
31. |
M. N. Kirsanov, “Analiticheskii metod rascheta progiba ploskoi fermy so slozhnoi reshetkoi shprengelnogo tipa”, Transportnoe stroitelstvo, 2017, no. 5, 11–13 |
32. |
M. N. Kirsanov, “Analiticheskii raschet ploskoi regulyarnoi fermy s rastyanutymi raskosami”, Stroitelnaya mekhanika i raschet sooruzhenii, 3:272 (2017), 31–35 |
33. |
N. Belyankin, A. Boiko, M. N. Kirsanov, “Analiticheskii raschet progiba balochnoi fermy s usilennoi treugolnoi reshetkoi”, Stroitelstvo i arkhitektura, 5:2 (2017), 42–44 |
34. |
M. N. Kirsanov, “Analiticheskii raschet progiba dvukhproletnoi ploskoi fermy”, Mekhanizatsiya stroitelstva, 2017, no. 5, 35–38 |
35. |
M. N. Kirsanov, “Analiticheskii raschet progiba raspornoi fermy s proizvolnym chislom panelei”, Mekhanizatsiya stroitelstva, 2017, no. 3, 26–29 |
36. |
M. N. Kirsanov, “Analiticheskoe issledovanie zhestkosti prostranstvennoi staticheski opredelimoi fermy”, Vestnik MGSU, 12:2 (2017), 165–171
|
4
[x]
|
37. |
M. N. Kirsanov, “Vyvod formuly dlya progiba reshetchatoi fermy, imeyuschei sluchai kinematicheskoi izmenyaemosti”, Stroitelnaya mekhanika i konstruktsii, 14:1 (2017), 27–30 |
38. |
M. N. Kirsanov, S. V. Astakhov, “Dvukhparametricheskaya induktsiya dlya vyvoda zavisimosti progiba fermy ot chisla panelei”, Materialy Vserossiiskoi nauchno-prakticheskoi konferentsii "45 let otrasli legkikh metallokonstruktsii: ot modulya Kislovodsk do modulya Pyatigorsk. Marutyana A.S., Faibishenko V.K., Vartumyana A.A. – Pyatigorsk: Izdatelstvo PF SKFU, Izdatelstvo PF SKFU Pyatigorsk, 2017, 151–155 |
39. |
M. N. Kirsanov, N. V. Zaborskaya, “Deformatsii periodicheskoi fermy s raskosnoi reshetkoi”, Inzhenerno-stroitelnyi zhurnal, 3:71 (2017), 61–67 |
40. |
M. N. Kirsanov, “Induktivnyi vyvod formul dlya deformatsii ploskoi reshetchatoi fermy”, Stroitelstvo i rekonstruktsiya, 2:70 (2017), 17–22 |
41. |
M. N. Kirsanov, “Induktivnyi vyvod formuly dlya progiba vneshne staticheski neopredelimoi ploskoi fermy”, Materialy Vserossiiskoi nauchno-prakticheskoi konferentsii "45 let otrasli legkikh metallokonstruktsii: ot modulya Kislovodsk do modulya Pyatigorsk. Marutyana A.S., Faibishenko V.K., Vartumyana A.A. – Pyatigorsk: Izdatelstvo PF SKFU, Izdatelstvo PF SKFU Pyatigorsk, 2017, 146–150 |
42. |
M. N. Kirsanov, “Induktivnyi metod vyvoda formuly dlya progiba reshetchatoi fermy, imeyuschei sluchai kinematicheskogo vyrozhdeniya”, Stroitelstvo i arkhitektura, 5:2 (2017), 45–49 |
43. |
M. N. Kirsanov, A. P. Suvorov, “Issledovanie deformatsii ploskoi vneshne staticheski neopredelimoi fermy”, Vestnik MGSU, 12:8 (2017), 869–875
|
1
[x]
|
44. |
M. N. Kirsanov, “K vyboru reshetki balochnoi fermy”, Stroitelnaya mekhanika inzhenernykh konstruktsii i sooruzhenii, 2017, no. 3, 23–27 |
45. |
M. N. Kirsanov, “Raschet progiba ploskoi reshetchatoi fermy s chetyrmya oporami”, Transportnoe stroitelstvo, 2017, no. 7, 15–17 |
46. |
M. N. Kirsanov, “Tochnoe reshenie zadachi o progibe balochnoi fermy s proizvolnym chislom panelei v sisteme Maple”, Stroitelstvo: nauka i obrazovanie, 7:1 (2017) |
47. |
M. N. Kirsanov, “Formula dlya opredeleniya progiba reshetchatoi fermy s proizvolnym chislom panelei”, Nauka v tsifrakh, 2017, no. 2, 22–24 |
48. |
M. N. Kirsanov, “Formuly dlya otsenki zhestkosti shprengelnoi fermy”, Sovremennaya nauka i innovatsii, 2017, no. 1, 159–163 , Stavropol, Stavropol |
49. |
M. N. Kirsanov, A. N. Maslov, “Formuly dlya rascheta progiba balochnoi mnogoreshetchatoi fermy”, Stroitelnaya mekhanika i raschet sooruzhenii, 271:2 (2017), 4–10 |
50. |
M. N. Kirsanov, “Formuly dlya rascheta progiba i usilii v reshetchatoi ferme”, Mekhanizatsiya stroitelstva, 874:4 (2017), 22–24 |
51. |
M. N. Kirsanov, “Formuly dlya rascheta progiba i usilii v sterzhnyakh simmetrichnoi balochnoi fermy”, Stroitelstvo i rekonstruktsiya, 69:1 (2017), 19–23 |
|
2016 |
52. |
M. N. Kirsanov, O. S. Kuznetsova, Algebra i geometriya. Sbornik zadach i reshenii s primeneniem sistemy Maple: uchebnoe posobie, Infra-M Moskva, 2016 , 272 pp. |
53. |
I. Yu Kazmiruk, M. N. Kirsanov, “Adaptive algorithm for selecting the optimal route”, Science Almanac, 24:10-3 (2016), 372–375 |
54. |
H. Jiang, M. N. Kirsanov, “An analytical expression for the influence line of the truss”, Vestnik nauchnykh konferentsii, 2016, 5, ucom Tambov, 2016, 10–11
|
1
[x]
|
55. |
M. Kirsanov, “An inductive method of calculation of the deflection of the truss regular type”, Architecture and Engineering, 1:3 (2016), 14–17
|
3
[x]
|
56. |
R. A. Voropai, E. V. Domanov, M. N. Kirsanov, “Analysis of the deflection of planar truss with double triangular lattice”, Science Almanac, 26:12-2 (2016), 208–211 |
57. |
E. V. Domanov, M. N. Kirsanov, “Analytical calculation of the deflection of the truss with cross-bar lattice”, Science Almanac, 25:11-2 (2016), 312–314 |
58. |
M. N. Kirsanov, “Analytical calculation, marginal and comparative analysis of a flat girder”, Scientific Herald of the Voronezh State University of Architecture and Civil Engineering. Construction and Architecture, 2016, no. 1, 84–105 |
59. |
M. N. Kirsanov, “Analytical study of the limiting properties of suspended cable system with a rigid beam”, //Mezhdunarodnaya shkola Matematicheskoe modelirovanie fundamentalnykh ob'ektov i yavlenii v sistemakh kompyuternoi matematiki Kazcas-16. Lektsii shkoly i materialy seminara, Kazanskii (Privolzhskii) federalnyi universitet Kazan, 2016, 179–190 |
60. |
A. M. Al-Shahrabi, M. N. Kirsanov, “Line of influence of the deflection for cantilever truss”, /Vestnik nauchnykh konferentsii. # 2-1(6). Nauka, obrazovanie, obschestvo: po materialam mezhdunarodnoi nauchno-prakticheskoi konferentsii 29 fevralya 2016 g, 6, Tambov, 2016, 6–7 |
61. |
R. A. Voropai, M. N. Kirsanov, “On the deformation of spatial cantilever trusses under the action of lateral loads”, Science Almanac, 23, ucom Tambov, 2016, 17–20
|
1
[x]
|
62. |
M. N. Kirsanov, “Stress State and Deformation of a Rectangular Spatial Rod Cover”, Scientific Herald of the Voronezh State University of Architecture and Civil Engineering. Construction and Architecture, 3:31 (2016), 71–79 |
63. |
M. N. Kirsanov, “The analysis of the degenerate case of oscillations of a mechanical system”, Mathematical Methods in the Applied Sciences, 39 (2016), 4545–4548 , United States, United States |
64. |
I. A. Ilin, M. N. Kirsanov, “The deflection and displacement of the bearings of the truss with rhombic lattice”, Science Almanac, 26:12 (2016), 216–219 |
65. |
Xiaomeng Dong, M. N. Kirsanov, “The dependence of the deflection of the truss from the position of the load for an arbitrary number of panels”, Vestnik nauchnykh konferentsii, 5, ucom Tambov, 2016, 6–7 |
66. |
R. A. Voropai, M. N. Kirsanov, “The formula for deflection of flat truss under the action of concentrated load”, Science Almanac, 25:11-2 (2016), 305–307 |
67. |
M. N. Kirsanov, “Analiz algoritmov vybora optimalnykh marshrutov gruppy sudov”, Vestnik gosudarstvennogo universiteta morskogo i rechnogo flota im. admirala S.O. Makarova, 2:36 (2016), 183–190 |
68. |
M. N. Kirsanov, “Analiz progiba fermy prostranstvennogo pokrytiya s krestoobraznoi reshetkoi”, Inzhenerno-stroitelnyi zhurnal, 64:4 (2016), 52–58
|
12
[x]
|
69. |
I. Yu. Kazmiruk, M. N. Kirsanov, “Analiz raboty modifitsirovannogo filtra Sobelya s maskoi 5 kh 5”, Nauchnyi almanakh, 25:11-2 (2016), 131–134 |
70. |
M. N. Kirsanov, “Analiticheskaya otsenka deformativnosti machty”, Montazhnye i spetsialnye raboty v stroitelstve, 889:10 (2016), 7–9 |
71. |
M. N. Kirsanov, “Analiticheskii raschet balochnoi fermy s reshetkoi tipa butterfly”, Stroitelnaya mekhanika i raschet sooruzhenii, 2016, no. 4, 2–5 |
72. |
L. K. Kiiko, M. N. Kirsanov, “Analiticheskii raschet pod'emnika parallelogrammnogo tipa s proizvolnym chislom sektsii”, Problemy mashinostroeniya i avtomatizatsii, 2016, no. 3, 48–53 , M., M. |
73. |
M. N. Kirsanov, “Analiticheskii raschet regulyarnoi balochnoi fermy s proizvolnym chislom panelei so slozhnoi reshetkoi”, Stroitelnaya mekhanika i raschet sooruzhenii, 2016, no. 3, 16–19 |
74. |
M. N. Kirsanov, “Analiticheskoe vyrazhenie dlya progiba balochnoi fermy so slozhnoi reshetkoi”, Modelirovanie i mekhanika konstruktsii, 2016, no. 4 |
75. |
M. N. Kirsanov, “Analiticheskoe issledovanie progiba ploskoi balochnoi fermy pod deistviem ravnomernoi nagruzki [Elektronnyi resurs”, Modelirovanie i mekhanika konstruktsii, 2016, no. 3 |
76. |
M. N. Kirsanov, “Analiticheskoe modelirovanie nagruzheniya balochnoi fermy regulyarnogo tipa”, Vestnik Moskovskogo energeticheskogo instituta, 2016, no. 6, 108–112 , M., M. |
77. |
M. N. Kirsanov, “Zavisimost progiba reshetchatoi fermy ot chisla panelei”, Nauchnyi vestnik Voronezhskogo gosudarstvennogo arkhitekturno-stroitelnogo universiteta. Stroitelstvo i arkhitektura, 4:44 (2016), 150–157 , Voronezh, Voronezh |
78. |
M. N. Kirsanov, “Induktivnyi analiz kvazistaticheskogo kriteriya vypuchivaniya sterzhnya pri polzuchesti”, Uprugost i neuprugost, Izdatelstvo Moskovskogo universiteta g. Moskva, 2016, 232–237 |
79. |
A. S. Gorbunova, M. N. Kirsanov, V. A. Lepetyukha, “Induktivnyi vyvod formuly dlya deformatsii ploskoi sterzhnevoi modeli pokrytiya promyshlennogo zdaniya [Elektronnyi resurs]”, Modelirovanie v mekhanike, 5 (2016) |
80. |
V. A. Kadymov, M. N. Kirsanov, “K postroeniyu optimalnykh marshrutov peredvizheniya dlya lits s ovz”, Materialy Vserossiiskoi nauchno-prakticheskoi konferentsii “Professionalnaya orientatsiya invalidov i lits s OVZ v sisteme mnogourovnevogo obrazovaniya: organizatsionnye i metodicheskie aspekty” (g. Moskva, 18 noyabrya 2016g.) M.: MGGEU, MGGEU Moskva, 2016, 294–304 |
81. |
M. N. Kirsanov, Ts. Khansyan, “Matematicheskaya model i analiz kolebanii nozhnichnogo mekhanizma s proizvolnym chislom elementov”, Chelovek. Obschestvo. Inklyuziya, 2:1 (2016), 175–182 |
82. |
M. N. Kirsanov, Kh. Tszyan, “Matematicheskaya model i analiz kolebanii nozhnichnogo mekhanizma s proizvolnym chislom elementov”, Stroitelstvo: novye tekhnologii - novoe oborudovanie, 2016, no. 10 |
83. |
M. N. Kirsanov, “Metodicheskii kompleks po teorii veroyatnostei na osnove generatora zadach i servisa Youtube”, Trudy Mezhdunarodnoi nauchno-metodicheskoi konferentsii Informatizatsiya inzhenernogo obrazovaniya INFORINO-2016, Izdatelstvo MEI Moskva, 2016, 673–674 |
84. |
E. V. Domanov, M. N. Kirsanov, “Modelnyi analiz raboty sterzhnevoi konstruktsii pokrytiya promyshlennogo zdaniya [Elektronnyi resurs]”, Modelirovanie i mekhanika konstruktsii, 5 (2016) |
85. |
M. N. Kirsanov, “Napryazhennoe sostoyanie i deformatsii pryamougolnogo prostranstvennogo sterzhnevogo pokrytiya”, Nauchnyi vestnik Voronezhskogo gosudarstvennogo arkhitekturno-stroitelnogo universiteta. Stroitelstvo i arkhitektura, 1:41 (2016), 93–100 , Voronezh, Voronezh |
86. |
M. N. Kirsanov, “O vliyanii naklona podvizhnoi opory na zhestkost balochnoi fermy”, Vestnik MGSU, 2016, no. 10, 35–44 |
87. |
M. N. Kirsanov, M. I. Vaskov, “O zavisimosti progiba sostavnoi balochnoi fermys parallelnymi poyasami ot chisla panelei pri zagruzhenii verkhnego poyasa”, Modelirovanie i mekhanika konstruktsii, 2016, no. 4 |
88. |
N. V. Zaborskaya, M. N. Kirsanov, “O zavisimosti chastoty kolebanii gruza ot ego mestopolozheniya na ferme”, Radioelektronika, elektrotekhnika i energetika. Tezisy dokladov Dvadtsat vtoroi Mezhdunarodnoi nauchno-tekhnicheskoi konferentsii studentov i aspirantov: v 3 tomakh, Izdatelskii dom MEI Moskva, 2016, 244–244 |
89. |
M. N. Kirsanov, S. P. Cherepanov, “O nekotorykh bisimmetrichnykh matritsakh regulyarnogo tipa”, Mezhdunarodnaya shkola “Matematicheskoe modelirovanie fundamentalnykh ob'ektov i yavlenii v sistemakh kompyuternoi matematiki - Kazcas-2016”. Mezhdunarodnaya nauchno-prakticheskaya konferentsiya “Informatsionnye tekhnologii v obrazovanii i nauke – ITON-2016”, Izd-vo Akademii nauk RT Kazan, 2016, 53–55 |
90. |
M. N. Kirsanov, “Otsenka progiba i ustoichivosti prostranstvennoi balochnoi fermy”, Stroitelnaya mekhanika i raschet sooruzhenii, 268:5 (2016), 19–22 |
91. |
M. N. Kirsanov, “Prikladnye i teoreticheskie problemy teorii stabilnosti”, Prostranstvo, vremya i fundamentalnye vzaimodeistviya, 2016, no. 4, 136–144 , Moskva, Moskva |
92. |
M. N. Kirsanov, “Raschet progiba simmetrichnoi balochnoi fermy v analiticheskoi forme”, Stroitelnaya mekhanika i konstruktsii, 13:2 (2016), 5–9 |
93. |
V. A. Kadymov, M. N. Kirsanov, “Realizatsiya algoritma Deikstry dlya resheniya zadachi o labirinte v sisteme Maple”, Chelovek. Obschestvo. Inklyuziya, 27:3 (2016), 133–140 |
94. |
M. N. Kirsanov, “Staticheskii analiz i montazhnaya skhema ploskoi fermy”, Vestnik gosudarstvennogo universiteta morskogo i rechnogo flota im. admirala S.O. Makarova, 39:5 (2016), 61–68
|
1
[x]
|
95. |
S. Yu. Gridnev, M. N. Kirsanov, I. G. Ovchinnikov, “Staticheskii raschet dvukhraskosnoi balochnoi fermy”, Internet-zhurnal Naukovedenie, 8:6 (2016), 1 |
96. |
M. N. Kirsanov, “Tochnye formuly dlya rascheta progiba i usilii v sterzhnyakh tipovoi fermy “Molodechno” s proizvolnym chislom panelei”, Inzhenerno-stroitelnyi zhurnal, 1:61 (2016), 33–41
|
6
[x]
|
97. |
M. N. Kirsanov, “Formula dlya rascheta progiba balochnoi fermy s proizvolnym chislom panelei”, Nauchnyi zhurnal, 6:7 (2016), 6–8 |
98. |
E. R. Ibragimova, M. N. Kirsanov, “Formula dlya smescheniya opor dvukhproletnoi nerazreznoi fermy, zagruzhennoi raspredelennoi nagruzkoi”, Nauchnyi almanakh, 24:10-3 (2016), 368–371 |
99. |
I. D. Vasilkov, M. N. Kirsanov, “Formuly dlya opredeleniya progiba i smescheniya opory fermy Bolmana s proizvolnym chislom panelei”, Nauchnyi almanakh, 25:11-2 (2016), 289–292 |
100. |
M. N. Kirsanov, “Formuly dlya rascheta ploskoi balochnoi fermy s proizvolnym chislom panelei”, Stroitelnaya mekhanika i konstruktsii, 2016, no. 1, 19–24 |
|
2015 |
101. |
M. N. Kirsanov, Resheniya zadach po teoreticheskoi mekhanike, Infra-M Moskva, 2015 , 216 pp. |
102. |
M. N. Kirsanov, Stabilnost elementov konstruktsii v uslovii polzuchesti. Chast 1. Sterzhni, v. 1, Infra-M Moskva, Moskva, 2015 , 184 pp. |
103. |
M. N. Kirsanov, “Analiz progiba reshetchatoi balochnoi fermy raspornogo tipa”, Inzhenerno-stroitelnyi zhurnal, 2015, no. 5, 58–65
|
8
[x]
|
104. |
M. N. Kirsanov, “Analiz progiba fermy pryamougolnogo prostranstvennogo pokrytiya”, Inzhenerno-stroitelnyi zhurnal, 1:53 (2015), 32–38
|
4
[x]
|
105. |
M. N. Kirsanov, “Analiticheskii raschet balochnoi fermy s uvelichennym podfermennym prostranstvom”, Stroitelnaya mekhanika i raschet sooruzhenii, 2015, no. 5, 21–25 |
106. |
M. N. Kirsanov, “Analiticheskii raschet balochnoi fermy so slozhnoi reshetkoi”, Stroitelnaya mekhanika i raschet sooruzhenii, 2015, no. 3, 7–11 |
107. |
M. N. Kirsanov, “Analiticheskii raschet progiba ploskoi reshetchatoi fermy treugolnogo ochertaniya”, Trends in Applied Mechanics and Mechatronics, 1, eds. Kirsanov, Mikhail Nikolaevich, Infra-M Moskva, 2015, 28–30 |
108. |
M. N. Kirsanov, “Analiticheskii raschet prostranstvennoi sterzhnevoi regulyarnoi struktury s ploskoi granyu”, Stroitelnaya mekhanika i raschet sooruzhenii, 2015, no. 2, 2–5 |
109. |
M. N. Kirsanov, “Analiticheskii raschet reshetchatoi fermy”, Modelirovanie i mekhanika konstruktsii, 2015, no. 2, 1–11 |
110. |
M. N. Kirsanov, “Analiticheskii raschet, predelnyi i sravnitelnyi analiz ploskoi balochnoi fermy”, Nauchnyi vestnik Voronezhskogo gosudarstvennogo arkhitekturno-stroitelnogo universiteta. Stroitelstvo i arkhitektura, 2015, no. 3, 86–93 , Voronezh, Voronezh |
111. |
M. N. Kirsanov, “Analiticheskoe issledovanie deformatsii ploskoi fermy arochnogo tipa”, Vestnik gosudarstvennogo universiteta morskogo i rechnogo flota im. admirala S.O. Makarova, 31:3 (2015), 42–48 |
112. |
M. N. Kirsanov, “Diskretnaya model svainogo fundamenta”, Inzhenerno-stroitelnyi zhurnal, 3:55 (2015), 3–9 |
113. |
M. N. Kirsanov, “Zhestkost torsionnoi podveski mikromekhanicheskogo volnovogo tverdotelnogo giroskopa”, Pribory i sistemy. Upravlenie, kontrol, diagnostika, 2015, no. 3, 18–22 |
114. |
M. N. Kirsanov, “Matematicheskaya model balochnoi fermy s elementami uprochneniya”, Inzhenerno-stroitelnyi zhurnal, 4:56 (2015), 38–44 |
115. |
M. N. Kirsanov, “Modifikatsiya i analiz filtrov vydeleniya konturov izobrazhenii”, Vestnik gosudarstvennogo universiteta morskogo i rechnogo flota im. admirala S.O. Makarova, 5:33 (2015), 201–206 |
116. |
M. N. Kirsanov, “Osobye tochki nachalnoi zadachi differentsialnogo uravneniya i ortogonalnye polinomy”, Mezhdunarodnaya nauchno-prakticheskaya konferentsiya - ITON-2015. Mezhdunarodnaya shkola-seminar po matematicheskomu modelirovaniyu v sistemakh kompyuternoi matematiki Kazcas-2015//Materialy konferentsii i trudy shkoly-seminara, Kazanskii universitet Kazan, 2015, 135–138 |
117. |
M. N. Kirsanov, “Raschet zhestkosti sterzhnevoi reshetki”, Vestnik mashinostroeniya, 2015, no. 8, 49–51 |
118. |
M. N. Kirsanov, “Sborniki zadanii po teoreticheskoi mekhanike. Obzor”, Zhurnal tekhnicheskikh issledovanii, 1 (2015), 4–4 , INFRA-M Moskva |
119. |
M. N. Kirsanov, “Sravnitelnyi analiz zhestkosti dvukh skhem arochnoi fermy”, Stroitelstvo unikalnykh zdanii i sooruzhenii, 9:36 (2015), 44–55 |
|
2014 |
120. |
M. N. Kirsanov, Teoreticheskaya mekhanika. Sbornik zadach, Infra-M Moskva, 2014 , 430 pp. |
121. |
M. N. Kirsanov, “Genetic Algorithm Optimization of Truss”, Mezhdunarodnaya nauchno-prakticheskaya konferentsiya ITON-2014. IV-i mezhdunarodnyi seminar i mezhdunarodnaya shkola Matematicheskoe i kompyuternoe modelirovanie fundamentalnykh ob'ektov i yavlenii v sistemakh kompyuternoi matematiki, OOO Foliant Kazan, 2014, 220–224 |
122. |
P. G. Leonov, M. N. Kirsanov, “Analiticheskii raschet i analiz prostranstvennoi sterzhnevoi konstruktsii v sisteme maple”, Trudy Mezhdunarodnoi nauchno-metodicheskoi konferentsii “Informatizatsiya inzhenernogo obrazovaniya” INFORINO-2014 (Moskva, 15-16 aprelya 2014 g.), Izdatelstvo MEI Moskva, 2014, 239–242 |
123. |
M. N. Kirsanov, “Analiticheskii raschet mnogoreshetchatoi fermy”, Stroitelnaya mekhanika i raschet sooruzhenii, 2014, no. 6, 2–6 |
124. |
M. N. Kirsanov, “Balochnaya ferma, chuvstvitelnaya k chetnosti chisla panelei”, Aktualnye voprosy v nauchnoi rabote i obrazovatelnoi deyatelnosti. Sbornik nauchnykh trudov po materialam Mezhdunarodnoi nauchno-prakticheskoi konferentsii. 30 aprelya 2014 g, 2, OOO Konsaltingovaya kompaniya Yukom Tambov, 2014, 52–53 |
125. |
M. N. Kirsanov, “Izgib, kruchenie i asimptoticheskii analiz prostranstvennoi sterzhnevoi konsoli”, Inzhenerno-stroitelnyi zhurnal, 2014, no. 5, 37–49
|
2
[x]
|
126. |
M. N. Kirsanov, “Induktivnyi metod resheniya zadach mekhaniki”, Mezhdunarodnaya nauchno-prakticheskaya konferentsiya ITON-2014. IV-i mezhdunarodnyi seminar i mezhdunarodnaya shkola Matematicheskoe i kompyuternoe modelirovanie fundamentalnykh ob'ektov i yavlenii v sistemakh kompyuternoi matematiki, OOO Foliant Kazan, 2014, 219–220 |
127. |
M. N. Kirsanov, “Opyt prepodavaniya teoreticheskoi mekhaniki v tekhnicheskom vuze”, Iv-i Mezhdunarodnyi nauchnyi seminar po matematicheskomu modelirovaniyu v sistemakh kompyuternoi matematiki “Kazcas-2014”. Mezhdunarodnaya shkola po matematicheskomu modelirovaniyu v sistemakh kompyuternoi matematiki, Izd-vo Kazan. un-ta Kazan, 2014, 111–115 |
128. |
M. N. Kirsanov, “Opyt chteniya lektsii po mekhanike i matematike na youtube.com”, Trudy Mezhdunarodnoi nauchno-metodicheskoi konferentsii “Informatizatsiya inzhenernogo obrazovaniya” INFORINO-2014 (Moskva, 15-16 aprelya 2014 g.), Izdatelstvo MEI Moskva, 2014, 427–430 |
129. |
M. N. Kirsanov, “Skrytaya osobennost i asimptoticheskie svoistva odnoi ploskoi balochnoi fermy”, Stroitelnaya mekhanika i raschet sooruzhenii, 2014, no. 4, 9–12 |
130. |
M. N. Kirsanov, “Uchet stroitelnogo pod'ema v analiticheskom raschete prostranstvennoi balochnoi fermy”, Izvestiya MGTU MAMI, 4:2 (2014), 36–40 , Moskva, Moskva |
|
2013 |
131. |
O. Vorobiev, M. Kirsanov, S. Cherepanov, “About some bissymmetric matrix of regular type”, Nauka i obrazovanie v XXI veke. Sbornik trudov po materialam Mezhdunarodnoi nauchno-prakticheskoi konferentsii 30 sentyabrya 2013 g, 23, Izd-vo TROO Biznes-Nauka-Obschestvo Tambov, 2013, 8–9 |
132. |
M. N. Kirsanov, E. A. Shpitonkova, “Simulation of ant algorithm using Maple with adding additional parameter”, Sistemy kompyuternoi matematiki i ikh prilozheniya. Materialy 14 mezhdunarodnoi nauchnoi konferentsii, posvyaschennoi 90-letiyu professora M.B.Balka, 14, Izd-vo SmolGU Smolensk, 2013, 57–59 |
133. |
M. N. Kirsanov, “Stress distribution instability in the plane problem of the theory of elasticity of heterogeneous bodies”, Journal of Applied Mechanics and Technical Physics, 54:3 (2013), 487–490 , Russian Federation, Russian Federation
|
1
[x]
|
134. |
V. A. Dedkov, M. N. Kirsanov, “The problem of control for multirobot systems”, Innovatsionnye tekhnologii: Materialy mezhdunarodnoi nauchno-prakticheskoi konferentsii, 2, MIEM NIU VShE Moskva, 2013, 206–213 |
135. |
M. N. Kirsanov, T. M. Andreevskaya, “Analiz vliyaniya uprugikh deformatsii machty na pozitsionirovanie antennogo i radiolokatsionnogo oborudovaniya”, Inzhenerno-stroitelnyi zhurnal, 40:5 (2013), 52–58
|
1
[x]
|
136. |
A. V. Grunichev, D. V. Demkin, M. N. Kirsanov, “Detektirovanie granits ob'ekta metodom porogovoi filtratsii karty nasyschennosti tsvetnogo izobrazheniya”, Innovatsionnye tekhnologii: Materialy mezhdunarodnoi nauchno-prakticheskoi konferentsii, 2, MIEM NIU VShE Moskva, 2013, 183–187 |
137. |
M. N. Kirsanov, S. A. Larichev, “Maplet dlya rascheta progiba ploskoi staticheski neopredelimoi fermy”, Trudy Rossiiskoi shkoly “Matematicheskoe i kompyuternoe modelirovanie fundamentalnykh ob'ektov i yavlenii” i Mezhdunarodnogo nauchnogo seminara “Nelineinye polya v teorii gravitatsii i kosmologii”, 21-26 oktyabrya 2013, Kazan, Otechestvo Kazan, 2013, 133–136 |
138. |
M. N. Kirsanov, “Nestabilnost raspredeleniya napryazhenii v ploskoi zadache teorii uprugosti neodnorodnogo tela”, Izv. SO RAN, PMTF, 2013, no. 3, 166–169 |
139. |
M. N. Kirsanov, I. V. Merkurev, “Osesimmetrichnaya zadacha o nelineinoi deformatsii uprugoi sredy sfericheskim telom”, Vestnik Moskovskogo energeticheskogo instituta, 2013, no. 5, 23–26 , M., M. |
140. |
M. N. Kirsanov, “Staticheskii raschet vantovoi sistemy”, Izvestiya MGTU MAMI, 1:3 (2013), 89–93 , Moskva, Moskva |
141. |
T. M. Andreevskaya, M. N. Kirsanov, “Uravneniya ravnovesiya uprugogo tela v trekhmernykh parabolicheskikh koordinatakh”, Innovatsionnye tekhnologii: Materialy mezhdunarodnoi nauchno-prakticheskoi konferentsii, 2, MIEM NIU VShE Moskva, 2013, 114–117 |
142. |
M. N. Kirsanov, “Nestabilnost raspredeleniya napryazhenii v ploskoi zadache teorii uprugosti neodnorodnogo tela”, Prikl. mekh. tekhn. fiz., 54:3 (2013), 166–169 ;
|
1
[x]
|
|
2012 |
143. |
M. N. Kirsanov, Maple i Maplet. Resheniya zadach mekhaniki, Lan Sankt-Peterburg, 2012 , 512 pp. |
144. |
M. N. Kirsanov, “Analiticheskii raschet i optimizatsiya prostranstvennoi balochnoi fermy”, Vestnik Moskovskogo energeticheskogo instituta, 2012, no. 5, 5–8 , M., M. |
145. |
M. N. Kirsanov, “Analiticheskii raschet prostranstvennoi sterzhnevoi sistemy”, Stroitelnaya mekhanika inzhenernykh konstruktsii i sooruzhenii, 2012, no. 1, 49–53 |
146. |
M. N. Kirsanov, P. G. Leonov, “Analiticheskoe reshenie zadachi o sterzhnevoi prostranstvennoi staticheski opredelimoi konstruktsii v sisteme Maple”, Sistemy kompyuternoi matematiki i ikh prilozheniya. Materialy 13 mezhdunarodnoi nauchnoi konferentsii, posvyaschennoi 75-letiyu professora E.I.Zverovicha, 13, Izd-vo SmolGU Smolensk, 2012, 33–35 |
147. |
M. N. Kirsanov, “Induktivnyi analiz vliyaniya pogreshnosti montazha na zhestkost i prochnost ploskoi fermy”, Inzhenerno-stroitelnyi zhurnal, 2012, no. 5, 38–42
|
2
[x]
|
148. |
P. V. Gorshkov, M. N. Kirsanov, N. V. Osadchenko, “Multimediinyi kurs “Teoreticheskaya mekhanika. Statika””, Trudy Mezhdunarodnoi nauchno-metodicheskoi konferentsii Informatizatsiya inzhenernogo obrazovaniya - INFORINO-2012 (Mockva, 10-11 aprelya 2012 g.), Izdatelskii dom MEI M, 2012, 441–442 |
149. |
M. N. Kirsanov, “Raschet prostranstvennoi sterzhnevoi sistemy, dopuskayuschei mgnovennuyu izmenyaemost”, Stroitelnaya mekhanika i raschet sooruzhenii, 2012, no. 3, 48–51 |
150. |
M. N. Kirsanov, P. G. Leonov, “Tochnoe reshenie zadachi deformirovaniya prostranstvennoi sterzhnevoi sistemy”, Informatsionno-telekommunikatsionnye tekhnologii i matematicheskoe modelirovanie vysokotekhnologicheskikh sistem. Tezisy dokladov Vserossiiskoi konferentsii s mezhdunarodnym uchastiem. RUDN , Moskva, 23-27 aprelya 2012 g, 1, RUDN Moskva, 2012, 191–194 |
151. |
M. N. Kirsanov, “Uprugii ekvivalent reologicheskoi sredy s translyatsionnym uprochneniem”, Sbornik Uprugost i neuprugost, 2012, 156–162 |
152. |
M. N. Kirsanov, “Evolyutsiya krivykh nestabilnosti napryazhenii v ploskoi zadache teorii uprugosti neodnorodnogo tela”, Vestnik Chuvashskogo gosudarstvennogo pedagogicheskogo universiteta im. I. Ya. Yakovleva. Seriya mekhanika predelnogo sostoyaniya, 2012, no. 2, 124–128 |
|
2011 |
153. |
M. N. Kirsanov, Praktika programmirovaniya v sisteme Maple, Izdatelskii dom MEI Moskva, 2011 , 208 pp. |
154. |
M. N. Kirsanov, E. V. Batulin, “Analiticheskoe issledovanie regulyarnykh sterzhnevykh struktur v sisteme Maple”, Sistemy kompyuternoi matematiki i ikh prilozheniya. Materialy XII mezhdunarodnoi nauchnoi konferentsii, 12, SmolGU Smolensk, 2011, 28–29 |
155. |
M. N. Kirsanov, “Vypuchivanie plastiny iz nelineinogo reologicheskogo materiala pri peremennom nagruzhenii”, Vestnik TGGPU, 2011, no. 2, 19–23 |
156. |
M. N. Kirsanov, “Osobennosti analiticheskogo rascheta prostranstvennykh sterzhnevykh sistem”, Stroitelnaya mekhanika i raschet sooruzhenii, 2011, no. 5, 11–15 |
157. |
M. N. Kirsanov, “Staticheskii raschet i analiz prostranstvennoi sterzhnevoi sistemy”, Inzhenerno-stroitelnyi zhurnal, 2011, no. 6, 28–34
|
4
[x]
|
158. |
M. N. Kirsanov, “Uravneniya kinematiki ploskogo mekhanizma v koordinatnoi forme”, Teoriya mekhanizmov i mashin, 9:2 (2011), 85–89 |
|
2010 |
159. |
M. N. Kirsanov, Zadachi po teoreticheskoi mekhanike s resheniyami v Maple 11, Fizmatlit Moskva, 2010 , 264 pp. |
160. |
M. N. Kirsanov, I. G. Klenova, “Analiz kolebanii sterzhnevykh sistem periodicheskoi struktury”, Xlvi Vserossiiskaya konferentsiya po problemam matematiki, informatiki, fiziki i khimii, RUDN Moskva, 2010, 145–147 |
161. |
M. N. Kirsanov, S. V. Vyleva, “Geneticheskii algoritm dlya resheniya zadachi Koshi”, Trudy Rossiiskoi letnei shkoly Matematicheskoe modelirovanie fundamentalnykh ob'ektov i yavlenii v sistemakh kompyuternoi matematiki 6-10 sentyabrya 2010 g. Kazan-Yalchik, Izd-vo Foliant' Kazan, 2010, 58–59 |
162. |
M. N. Kirsanov, “Geneticheskii algoritm optimizatsii sterzhnevykh sistem”, Stroitelnaya mekhanika i raschet sooruzhenii, 2010, no. 2, 60–63 |
163. |
M. N. Kirsanov, “Opredelenie, svoistva i prilozheniya odnogo nelineinogo differentsialnogo operatora”, Vestnik TGGPU, 4:22 (2010), 43–48 |
164. |
M. N. Kirsanov, “Opyt obrabotki izobrazhenii v sisteme Maple”, Sistemy kompyuternoi matematiki i ikh prilozheniya. Materialy XI mezhdunarodnoi nauchnoi konferentsii, posvyaschennoi 70-letiyu professora V.P. Dyakonova, 11, SmolGU Smolensk, 2010, 30–32 |
165. |
M. N. Kirsanov, M. E. Solovev, “Otsenka zhestkosti ploskoi balochnoi fermy”, Xlvi Vserossiiskaya konferentsiya po problemam matematiki, informatiki, fiziki i khimii, RUDN Moskva, 2010, 148–150 |
166. |
M. N. Kirsanov, “Tochki nestabilnosti differentsialnogo uravneniya”, Vestnik Chuvashskogo gosudarstvennogo pedagogicheskogo universiteta im. I. Ya. Yakovleva. Seriya mekhanika predelnogo sostoyaniya, 2010, no. 2, 191–197 |
|
2009 |
167. |
M. N. Kirsanov, “Zadachi matematicheskoi logiki dlya distantsionnogo obucheniya”, Informatizatsiya inzhenernogo obrazovaniya. Elektronnye obrazovatelnye resursy MEI, 4, Izdatelstvo MEI Moskva, 2009, 29–31 |
168. |
M. N. Kirsanov, “Zadachi teoreticheskoi mekhaniki dlya distantsionnogo obucheniya”, Informatizatsiya inzhenernogo obrazovaniya. Elektronnye obrazovatelnye resursy MEI, 4, Izdatelstvo MEI Moskva, 2009, 24–25 |
169. |
M. N. Kirsanov, I. G. Klenova, “Induktivnyi metod issledovaniya kolebanii sistem s periodicheskoi strukturoi”, Matematika, informatika, estestvoznanie v ekonomike i v obschestve. Trudy mezhdunarodnoi nauchno-prakticheskoi konferentsii, 1, MFYuA Moskva, 2009, 113–114 |
170. |
M. N. Kirsanov, M. E. Solovev, “Metody sovershenstvovaniya neironnoi seti Khopfilda”, Sistemy kompyuternoi matematiki i ikh prilozheniya. Materialy mezhdunarodnoi konferentsii, 10, SmolGU Smolensk, 2009, 47–49 |
171. |
M. N. Kirsanov, “Teoreticheskaya mekhanika”, Informatizatsiya inzhenernogo obrazovaniya. Elektronnye obrazovatelnye resursy MEI, 4, Izdatelstvo MEI Moskva, 2009, 22–23 |
172. |
M. N. Kirsanov, “Uchebno-metodicheskii kompleks “Diskretnaya matematika””, Informatizatsiya inzhenernogo obrazovaniya. Elektronnye obrazovatelnye resursy MEI, 4, Izdatelstvo MEI Moskva, 2009, 39–40 |
|
2008 |
173. |
M. N. Kirsanov, Reshebnik. Teoreticheskaya mekhanika, Fizmatlit Moskva, 2008 , 384 pp. |
|
2007 |
174. |
M. N. Kirsanov, Grafy v Maple, Fizmatlit Moskva, 2007 , 168 pp. |
175. |
M. N. Kirsanov, “Programma rascheta ploskoi staticheski opredelimoi fermy”, Informatizatsiya inzhenernogo obrazovaniya. Elektronnye obrazovatelnye resursy MEI, 2, Izdatelstvo MEI Moskva, 2007, 61–62 |
176. |
M. N. Kirsanov, “Stabilnost lineinogo differentsialnogo uravneniya pervogo poryadka”, Vestnik Moskovskogo pedagogicheskogo universiteta, Informatika i informatizatsiya obrazovaniya, 1, Foliant' Kazan, 2007, 386–389 |
|
2006 |
177. |
V. V. Pokazeev, V. I. Matyash, M. N. Kirsanov, G. V. Cherkesova, Kurs lektsii. Elementy diskretnoi matematiki, MGTU MAMI Moskva, 2006 , 272 pp. |
178. |
M. N. Kirsanov, “Generator zadach po teoreticheskoi mekhanike i matematike”, Informatizatsiya inzhenernogo obrazovaniya. Elektronnye obrazovatelnye resursy MEI, Izdatelstvo MEI Moskva, 2006, 59–62 |
179. |
V. M. Safronov, M. N. Kirsanov, “Otsenka vozmozhnosti zaklinivaniya porshnya v pnevmoprivodakh”, Pribory i sistemy. Upravlenie, kontrol, diagnostika, 2006, no. 10, 37–40 |
180. |
M. N. Kirsanov, V. M. Safronov, “Povedenie sistemy pnevmotsilindr-porshen v ekstremalnykh usloviyakh”, Mezhdunarodnaya nauchno-tekhnicheskaya konferentsiya Vychislitelnaya mekhanika deformiruemogo tverdogo tela, 1, MIIT Moskva, 2006, 217–218 |
|
2005 |
181. |
M. N. Kirsanov, Sbornik ekzamenatsionnykh zadach po dinamike, Izdatelskii dom MEI Moskva, 2005 , 96 pp. |
182. |
M. N. Kirsanov, “Generator zadach po teoreticheskoi mekhanike i matematike”, Mezhdunarodnaya konferentsiya Sovremennye tekhnologii v prepodavanii kursa teoreticheskoi mekhaniki, posvyaschennoi 75-letiyu kafedry Teoreticheskaya mekhanika, Izdatelstvo TulGU Tula, 2005, 40–43 |
183. |
M. N. Kirsanov, A. V. Koretskii, N. V. Osadchenko, A. A. Kuznetsov, “Uchebno-metodicheskii kompleks Teoreticheskaya mekhanika”, Informatizatsiya inzhenernogo obrazovaniya. Elektronnye obrazovatelnye resursy MEI, Izdatelstvo MEI Moskva, 2005, 29–32 |
|
2004 |
184. |
M. N. Kirsanov, “Kinematika ploskogo chetyrekhzvennika”, Sbornik nauchno-metodicheskikh statei, Teoreticheskaya mekhanika, 25, Izdatelstvo Moskovskogo universiteta Moskva Moskva, 2004, 148–151 |
185. |
M. N. Kirsanov, “Kinematika ploskogo chetyrekhzvennika”, Sbornik nauchno-metodicheskikh statei. Teoreticheskaya mekhanika, 25, Izdatelstvo Moskovskogo universiteta Moskva, 2004, 148–151 |
186. |
M. N. Kirsanov, “Opredelenie i analiz stabilnosti dvizheniya s ispolzovaniem sistemy Maple”, Exponenta Pro. Matematika v prilozheniyakh, 2004, no. 3-4, 134–137 |
187. |
M. N. Kirsanov, “Stabilnost resheniya differentsialnogo uravneniya i analiz dvizheniya mekhanicheskikh sistem”, Pyatyi mezhdunarodnyi simpozium po klassicheskoi i nebesnoi mekhanike. Velikie Luki. Rossiya (tezisy dokladov), VTs RAN Moskva-Velikie Luki, 2004, 23–28 |
188. |
M. N. Kirsanov, “Stabilnost sfericheskogo dvizheniya”, Mezhdunarodnyi forum informatizatsii MFI-2004. Doklady mezhdunarodnoi konferentsii Informatsionnye sredstva i tekhnologii, 1, Yanus-K Moskva, 2004, 81–83 |
|
2003 |
189. |
M. N. Kirsanov, “Vozmuschenie uskorenii i vysshikh proizvodnykh nelineinogo dinamicheskogo protsessa”, Mezhdunarodnyi forum informatizatsii MFI-2003. Doklady mezhdunarodnoi konferentsii Informatsionnye sredstva i tekhnologii, 2, Yanus-K Moskva, 2003, 64–66 |
190. |
M. N. Kirsanov, “Matematicheskii tsentr moskovskogo metro”, Exponenta Pro. Matematika v prilozheniyakh, 2003, no. 4, 60–62 |
|
2002 |
191. |
M. N. Kirsanov, “Metod uprugogo ekvivalenta dlya monitoringa bifurkatsii vysokikh poryadkov teploenergeticheskikh sistem v uslovii polzuchesti”, Mezhdunarodnyi forum informatizatsii MFI-2002. Doklady mezhdunarodnoi konferentsii Informatsionnye sredstva i tekhnologii, 3, Yanus-K Moskva, 2002, 109–112 |
|
2001 |
192. |
M. N. Kirsanov, “Induktivnyi metod resheniya zadach statiki i dinamiki sterzhnevykh sistem”, Mezhdunarodnyi forum informatizatsii MFI-2001. Doklady mezhdunarodnoi konferentsii Informatsionnye sredstva i tekhnologii, 2, Stankin Moskva, 2001, 163–166 |
193. |
M. N. Kirsanov, “Optimizatsiya prostranstvennoi fermy s uchetom polzuchesti materiala”, Izvestiya VUZov. Stroitelstvo, 2001, no. 10, 11–15 |
|
2000 |
194. |
V. P. Belomyttsev, M. N. Kirsanov, V. D. Korobkin, Kinematika: Metodicheskie ukazaniya i kontrolnye zadaniya po kursu teoreticheskoi mekhaniki, Voronezh.gos.arkh.-stroit.akad Voronezh:, 2000 , 30 pp. |
195. |
M. N. Kirsanov, “Optimalnaya vysota balochnoi fermy s uchetom lineinoi polzuchesti materiala”, Izvestiya VUZov. Stroitelstvo, 2000, no. 5, 141–144 |
|
1999 |
196. |
S. Yu. Gridnev, M. N. Kirsanov, Raschet staticheski opredelimoi ramy s vychisleniem peremeschenii, VGASA Voronezh, 1999 , 20 pp. |
197. |
M. N. Kirsanov, “Reduktsiya obyknovennogo differentsialnogo uravneniya”, Pontryaginskie chteniya Kh. Tezisy dokladov, VGU Voronezh, 1999, 286–286 |
|
1998 |
198. |
A. S. Prokofev, M. N. Kirsanov, Inzhenernye konstruktsii: Metodicheskie ukazaniya k kursovoi rabote (dlya studentov spetsialnosti 2901- Arkhitektura), Voronezhsk.gos.arkh.-str.akademiya Voronezh, 1998 , 36 pp. |
|
1997 |
199. |
M. N. Kirsanov, “Singular points of the creep deformation and buckling of a column”, International Journal of Engineering Science, 5:3 (1997), 221–227 , Netherlands, Netherlands
|
3
[x]
|
|
1996 |
200. |
M. N. Kirsanov, “Creep of thick-walled tube in elastic ring under action of internal pressure”, Problemy Mashinostraeniya i Nadezhnos’ti Mashin, 2 (1996), 60–63 |
201. |
M. N. Kirsanov, “Matematicheskie osnovy nekotorykh zadach mekhaniki”, Izvestiya VUZov. Stroitelstvo, 1996, no. 6, 39–44 |
202. |
M. N. Kirsanov, “Polzuchest tolstostennoi truby v uprugoi oboime pod deistviem vnutrennego davleniya”, Problemy mashinostroeniya i nadezhnosti mashin, 1996, no. 2, 60–63 , M., M. |
|
1995 |
203. |
M. N. Kirsanov, “Nesuschaya sposobnost armirovannykh sterzhnei pri osevom szhatii”, Izvestiya VUZov. Stroitelstvo, 1995, no. 11, 6–9 |
204. |
M. N. Kirsanov, “Uslovie reduktsii obyknovennogo differentsialnogo uravneniya”, DEP v VINITI, 95:423 (1995), 1–7 |
|
1994 |
205. |
M. N. Kirsanov, “Buckling of a ductile column under rigid loading”, Journal of Applied Mechanics and Technical Physics, 35:4 (1994), 634–638 , Russian Federation, Russian Federation |
206. |
M. N. Kirsanov, V. D. Klyushnikov, “Singular points of deformation process and creep buckling of a cylindrical shell”, Journal of Applied Mechanics and Technical Physics, 35:5 (1994), 761–769 , Russian Federation, Russian Federation |
207. |
M. N. Kirsanov, “Vypuchivanie vyazkogo sterzhnya pri zhestkom nagruzhenii”, Izv. SO AN SSSR, Prikladnaya mekhanika i tekhnicheskaya fizika (PMTF), 1994, no. 4, 159–163 |
208. |
M. N. Kirsanov, “Vypuchivanie sloistoi plastiny pri polzuchesti”, Problemy mashinostroeniya i nadezhnosti mashin, 1994, no. 4, 53–58 , M., M. |
209. |
M. N. Kirsanov, “O reaktsii szhatogo sterzhnya na vozmuscheniya vysshikh proizvodnykh progiba v usloviyakh polzuchesti”, Problemy mashinostroeniya i nadezhnosti mashin, 1994, no. 1, 43–47 , M., M. |
210. |
M. N. Kirsanov, V. D. Klyushnikov, “Singular points of deformation process and creep buckling of a cylindrical shell”, J. Appl. Mech. Tech. Phys., 35:5 (1994), 761–769 |
211. |
M. N. Kirsanov, “Otsenka snizheniya nesuschei sposobnosti zhelezobetonnykh, kompozitnykh konstruktsii i ikh elementov v usloviyakh polzuchesti na osnove analiza ikh ustoichivosti”, Sbornik referatov nauchno-issledovatelskikh rabot, vypolnennykh po grantam administratsii Voronezhskoi oblasti, Izdatelstvo Voronezhskogo universiteta Voronezh, 1994, 72–72 |
212. |
M. N. Kirsanov, “Uchet pogreshnosti approksimatsii v reshenii zadachi vypuchivaniya pri ustanovivsheisya polzuchesti po teorii osobykh tochek”, Tez. dokl. shkoly Sovremennye problemy mekhaniki i matematicheskoi fiziki, VGU Voronezh, 1994, 49–49 |
213. |
M. N. Kirsanov, “Buckling of a ductile column under rigid loading”, J. Appl. Mech. Tech. Phys., 35:4 (1994), 634–638 |
|
1993 |
214. |
M. N. Kirsanov, “Initial transgritical behavior in a compressed rod under creep conditions”, Journal of Applied Mechanics and Technical Physics, 34:2 (1993), 292–295 , Russian Federation, Russian Federation |
215. |
M. N. Kirsanov, “Nachalnoe zakriticheskoe povedenie szhatogo sterzhnya v usloviyakh polzuchesti”, Izv. SO AN SSSR, Prikladnaya mekhanika i tekhnicheskaya fizika (PMTF), 1993, no. 2, 152–156 |
216. |
M. N. Kirsanov, V. D. Klyushnikov, “Opredelenie osobykh tochek protsessa deformirovaniya szhatogo sterzhnya v usloviyakh polzuchesti”, Izvestiya Akademii nauk SSSR. Mekhanika tverdogo tela, 1993, no. 3, 144–150 |
217. |
M. N. Kirsanov, “Osobye tochki protsessa deformirovaniya trekhmernykh tel pri polzuchesti”, Sovremennye metody staticheskogo i dinamicheskogo rascheta sooruzhenii i konstruktsii, 2, VGASA Voronezh, 1993, 19–27 |
218. |
M. N. Kirsanov, “Initial transgritical behavior in a compressed rod under creep conditions”, J. Appl. Mech. Tech. Phys., 34:2 (1993), 292–295 |
|
1992 |
219. |
M. N. Kirsanov, “Effect of the choice of creep instability criterion on the solution of the problem of optimizing rod-shaped structures”, Journal of Applied Mechanics and Technical Physics, 33:4 (1992), 573–576 , Russian Federation, Russian Federation |
220. |
M. N. Kirsanov, “O vliyanii vybora kriteriya neustoichivosti pri polzuchesti na reshenie zadachi optimizatsii sterzhnevykh konstruktsii”, Izv. SO AN SSSR, Prikladnaya mekhanika i tekhnicheskaya fizika (PMTF), 1992, no. 4, 107–110 |
221. |
M. N. Kirsanov, “Effect of the choice of creep instability criterion on the solution of the problem of optimizing rod-shaped structures”, J. Appl. Mech. Tech. Phys., 33:4 (1992), 573–576 |
|
1990 |
222. |
M. N. Kirsanov, “K opredeleniyu osobykh tochek protsessa deformirovaniya obolochek pri polzuchesti”, Aktualnye zadachi mekhaniki deformiruemogo tverdogo tela, Izd-vo Voronezhskogo universiteta Voronezh, 1990, 69–76 |
223. |
M. N. Kirsanov, “Osobye bifurkatsionnye tochki protsessa deformirovaniya prodolnymi silami gibkogo sterzhnya iz materiala, obladayuschego svoistvami polzuchesti so stepennym uprochneniem”, Metody i algoritmy rascheta sooruzhenii i konstruktsii, Voronezhskii politekhnicheskii institut Voronezh, 1990, 97–100 |
|
1988 |
224. |
M. N. Kirsanov, Programmy dlya inzhenernykh raschetov na mikrokalkulyatore Elektronika V3-34, VISI Voronezh, 1988 , 32 pp. |
225. |
M. N. Kirsanov, “Opredelenie neustoichivosti reologicheskikh tel”, Effektivnye kompozity i konstruktsii, VPI Voronezh, 1988, 120–127 |
|
1987 |
226. |
M. N. Kirsanov, Raschet staticheski neopredelimoi ramy metodom sil. Metodicheskie ukazaniya po stroitelnoi mekhanike dlya studentov arkhitekturnogo fakulteta, VISI Voronezh, 1987 , 25 pp. |
227. |
M. N. Kirsanov, Raschet staticheski opredelimoi ramy. Metodicheskie ukazaniya po stroitelnoi mekhanike dlya studentov arkhitekturnogo fakulteta, VISI Voronezh, 1987 , 19 pp. |
228. |
M. N. Kirsanov, “Osesimmetrichnaya forma poteri ustoichivosti i predelnaya nagruzka tsilindricheskoi obolochki”, Prikladnye zadachi teorii sooruzhenii, Izdatelstvo Voronezhskogo universiteta Voronezh, 1987, 117–125 |
|
1986 |
229. |
M. N. Kirsanov, “Instability of a Cylindrical Shell Under Creep”, Mechanics of Solids, 21:6 (1986), 118–121 , United States, United States |
230. |
M. N. Kirsanov, “Neustoichivost tsilindricheskoi obolochki pri polzuchesti”, Izvestiya Akademii nauk SSSR. Mekhanika tverdogo tela, 1986, no. 6, 126–129 |
|
1985 |
231. |
M. N. Kirsanov, “Osobye tochki protsessa deformirovaniya i neustoichivost pri polzuchesti”, VINITI dep. 2205-85Dep, 1985, 1–13 |
|
1984 |
232. |
M. N. Kirsanov, “Kriterii ustoichivosti pri polzuchesti”, DEP v VINITI, 84:7743 (1984), 1–13 |
233. |
M. N. Kirsanov, “Neustoichivost plastiny pri peremennom nagruzhenii v usloviyakh polzuchesti”, DEP v VINITI, 7744:84 (1984), 1–12 |
234. |
M. N. Kirsanov, “O vliyanii istorii nagruzheniya na ustoichivost plasticheskoi konstruktsii pri neodnorodnom dokriticheskom sostoyanii”, DEP v VINITI, 84:5221 (1984), 1–11 |
235. |
M. N. Kirsanov, “O vybore raschetnoi skhemy v odnoi zadache ustoichivosti pri neodnorodnom dokriticheskom sostoyanii”, VINITI, 84:5221 (1984), 1–11 |
|
1982 |
236. |
M. N. Kirsanov, “Modelnoe predstavlenie poteri ustoichivosti pri neodnorodnom dokriticheskom sostoyanii”, VINITI, 82:303 (1982), 1–21 |
|
1979 |
237. |
M. N. Kirsanov, A. N. Sporykhin, “O neustoichivosti sfericheskogo tela pri ravnomernom nagruzhenii”, Izv. SO AN SSSR, Prikladnaya mekhanika i tekhnicheskaya fizika (PMTF), 1979, no. 1, 161–165 |
238. |
M. N. Kirsanov, “Raschet kontsevoi mufty stalnogo kanata”, Issledovanie visyachikh i kombinirovannykh konstruktsii, VGU Voronezh, 1979, 22–31 |
239. |
M. N. Kirsanov, A. N. Sporykhin, “Instability of a spherical body under uniform loading”, J. Appl. Mech. Tech. Phys., 20:1 (1979), 123–126 |
|