Аннотация:
For the first time, complex geometry combustible structures of an ammonium perchlorate–polylactic acid composite have been successfully printed using fused deposition modeling (FDM). The structural and energetic capabilities of the printed structures are demonstrated. Combined with the ability to be produced by FDM printing, these combustible elements could afford many practical applications.
Образец цитирования:
K. A. Monogarov, I. V. Fomenkov, A. N. Pivkina, “FDM 3D printing of combustible structures: First results”, Mendeleev Commun., 32:2 (2022), 228–230
Образцы ссылок на эту страницу:
https://www.mathnet.ru/rus/mendc622
https://www.mathnet.ru/rus/mendc/v32/i2/p228
Эта публикация цитируется в следующих 9 статьяx:
Farideddin Bazzal, Jonas S. Hoffmann, Gregory Young, Michael J. Bortner, Christopher B. Williams, “Direct Ink Writing of Aluminized Solid Fuels for Hybrid Rockets Using a Dual-Cure Approach”, ACS Appl. Eng. Mater., 2025
Chao Guo, Hao Cui, Hao Ren, Lei Xiao, Xiaohui Gu, Yuyong Tang, Hao Zhou, Yongliang Yang, Rui Guo, “Experimental Investigation of Quasi‐Static Compressive Properties of Polymer‐Bonded Explosives (PBX) Based on UV‐Curing 3D Printing”, Propellants Explo Pyrotec, 2024
Joseph Kalman, Aaren Cortes, Fangyuan Tian, “Surface modification effects on ammonium perchlorate wettability”, Applied Surface Science, 678 (2024), 161108
Я.А. Дубкова, Д.А. Ткачев, Я.Ю. Верхошанский, И.А. Бельчиков, “on the possibility of forming solid combustibles using additive DLP method”, Южно-Сибирский научный вестник, 2023, № 5(51), 183
A. H. Kadhum, Salah Al-Zubaidi, Salah S. Abdulkareem, “Effect of the Infill Patterns on the Mechanical and Surface Characteristics of 3D Printing of PLA, PLA+ and PETG Materials”, ChemEngineering, 7:3 (2023), 46
Ali H. Kadhum, Salah Al-Zubaidi, Salah Sabeeh Abed AlKareem, Andreas Bück, “Optimization of Mechanical Properties and Surface Characteristics of PLA+ 3D Printing Materials”, International Journal of Chemical Engineering, 2023 (2023), 1
Dmitrii Tkachev, Yana Dubkova, Alexander Zhukov, Yanis Verkhoshanskiy, Alexander Vorozhtsov, Ilya Zhukov, “Photocurable High-Energy Polymer-Based Materials for 3D Printing”, Polymers, 15:21 (2023), 4252
Justin Lajoie, Jacob Blocker, Travis Sippel, “Rheological, Ballistic, and Mechanical Properties of 3D Printed, Photocured Composite Propellants”, Journal of Propulsion and Power, 39:6 (2023), 936
S. Ganeshkumar, S. Dharani Kumar, U. Magarajan, S. Rajkumar, B. Arulmurugan, Shubham Sharma, Changhe Li, R. A. Ilyas, Mohamed Fathy Badran, “Investigation of Tensile Properties of Different Infill Pattern Structures of 3D-Printed PLA Polymers: Analysis and Validation Using Finite Element Analysis in ANSYS”, Materials, 15:15 (2022), 5142