|
Effect of compression pressure on the characteristics of radiation protective composites
V. I. Pavlenko, D. S. Romanyuk, V. V. Kashibadze, O. V. Kuprieva Belgorod Shukhov State Technological University
Abstract:
The results of a study of the influence of compaction pressure on the characteristics of radiation-protective composites based on polyethylene and boron carbide B4C are presented. Using software modeling, the temperature range for heating a mold of a given size was selected. The required holding time of the composite was determined experimentally, and defects that arise from various deviations from the optimal temperature parameters were identified. The results of testing the strength of samples under various pressing pressure conditions are presented, and the optimal pressure value is found. A composite was obtained with the following mechanical characteristics under optimal pressing conditions: density (1.09 ± 0.01) g/cm3, bending strength (5.72 ± 0.18) MPa, sound velocity in the composite (2050.00 ± 0.01) m/s.
Keywords:
protective composite, boron carbide B4C, mechanical characteristics, hot pressing.
Received: 01.09.2023 Revised: 31.10.2023 Accepted: 27.11.2023
Citation:
V. I. Pavlenko, D. S. Romanyuk, V. V. Kashibadze, O. V. Kuprieva, “Effect of compression pressure on the characteristics of radiation protective composites”, Prikl. Mekh. Tekh. Fiz., 65:3 (2024), 107–115; J. Appl. Mech. Tech. Phys., 65:3 (2024), 488–495
Linking options:
https://www.mathnet.ru/eng/pmtf6102 https://www.mathnet.ru/eng/pmtf/v65/i3/p107
|
Statistics & downloads: |
Abstract page: | 42 | References: | 15 | First page: | 7 |
|