|
This article is cited in 2 scientific papers (total in 2 papers)
Effects of the laser–water-jet processing of silicon carbide
Y. L. Chena, X. Lia, X. Chenb, H. Lia, X. Xub a School of Mechanical Engineering, Hefei University of Technology, Hefei, 230009 China
b School of Mechanical and Electrical Engineering, Anhui Jianzhu University, Hefei, 230601 China
Abstract:
The effects of the water-jet velocity and its angle on the laser–water-jet processing results are studied. It is found that the depth of laser–water-jet processing gradually increases with an increase in the water-jet angle; however, this increasing trend becomes less pronounced as the water-jet angle increases from 60 to 75$^\circ$. As the water-jet velocity increases, the depth of laser–water-jet processing gradually increases.
Keywords:
laser–water-jet processing; silicon carbide; water-jet angle; water-jet velocity.
Received: 21.07.2020 Revised: 24.08.2020 Accepted: 28.09.2020
Citation:
Y. L. Chen, X. Li, X. Chen, H. Li, X. Xu, “Effects of the laser–water-jet processing of silicon carbide”, Prikl. Mekh. Tekh. Fiz., 63:1 (2022), 16–22; J. Appl. Mech. Tech. Phys., 63:1 (2022), 11–16
Linking options:
https://www.mathnet.ru/eng/pmtf4 https://www.mathnet.ru/eng/pmtf/v63/i1/p16
|
Statistics & downloads: |
Abstract page: | 50 | References: | 24 | First page: | 9 |
|