|
This article is cited in 6 scientific papers (total in 6 papers)
Non-stationary process characteristics of the gas outflow into a liquid
M. V. Alekseeva, I. S. Vozhakovab, S. I. Lezhnina a Institute of Thermophysics SB RAS
b Novosibirsk State University
Abstract:
A numerical simulation of the process of the outflow of gas under pressure into a closed container partially filled with liquid was carried out. For comparative theoretical analysis, an asymptotic model was used with assumptions about the adiabaticity of the gas outflow process and the ideality of the liquid during the oscillatory one-dimensional motion of the liquid column. In this case, the motion of the liquid column and the evolution of pressure in the gas are determined by the equation of dynamics and the balance of enthalpy. Numerical simulation was performed in the OpenFOAM package using the fluid volume method (VOF method) and the standard k-e turbulence model. The evolution of the fields of volumetric gas content, velocity, and pressure during the flow of gas from the high-pressure chamber into a closed channel filled with liquid in the presence of a "gas blanket" at the upper end of the channel is obtained. It was shown that the dynamics of pulsations in the gas cavity that occurs when the gas flows into the closed region substantially depends on the physical properties of the liquid in the volume, especially the density. Numerical modeling showed that the injection of gas into water occurs in the form of a jet outflow of gas, and for the outflow into liquid lead, a gas slug is formed at the bottom of the channel. Satisfactory agreement was obtained between the numerical calculation and the calculation according to the asymptotic model for pressure pulsations in a gas projectile in liquid lead. For water, the results of calculations using the asymptotic model give a significant difference from the results of numerical calculations. In all cases, the velocity of the medium obtained by numerical simulation and when using the asymptotic model differ by an order of magnitude or more.
Keywords:
OpenFOAM, gas outflow, high pressure chamber, OpenFOAM, gas injection into water, gas injection into liquid lead.
Received: 31.10.2019
Linking options:
https://www.mathnet.ru/eng/pmim370
|
Statistics & downloads: |
Abstract page: | 9 | Full-text PDF : | 1 | References: | 5 |
|