RDX flame structure at atmospheric pressure

The chemical structure of an RDX flame at a pressure of 1 atm was studied using probing molecular beam mass spectrometry. The flame was found to contain RDX vapor, and its concentration profile was measured in a narrow zone adjacent to the burning surface. In addition to RDX vapor, ten more species were identified (H$_2$, H$_2$O, HCN, N$_2$, CO, CH$_2$O, NO, N$_2$O, CO$_2$ and NO$_2$), and their concentration profiles were measured. Two main chemical-reaction zones were found in the RDX flame. In the first, narrow, zone 0.15 mm wide adjacent to the burning surface, decomposition of RDX vapor and the reaction of NO$_2$, N$_2$O, and CH$_2$O with the formation of HCN and NO occur. In the second, wide, zone 0.85 mm wide, HCN is oxidized by NO to form the final combustion products. The composition of the final combustion products was analyzed from an energetic point of view. The measured composition of the products near the burning surface was used to determine the global reaction of RDX gasification at a pressure of 1 atm. Values of heat release in the condensed-phase calculated by the global gasification reaction and by the equation of heat balance on the burning surface (using data of microthermocouple measurements) were analyzed and compared.